• 6.0kVA – 48V Inverter – Studer Xtender XTH 6000

    PRAG offers you 6.0kVA – 48V Inverter – Studer Xtender XTH 6000 -48 with its seemingly limitless programmable functions, the XTH offers unequaled flexibility compared to other products on the market.

    Continuous power rating of 5kVA up to an ambient temperature of 40°C, 30 minute power rating of 6kVA, 15kVA for up to 5 seconds!

  • 6.5KVA – 48V Inverter – H

    Description
    PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.

    So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today.

    Furthermore, the PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

    Subsequently, PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

    PRAG 6.5KVA – 48V Inverter Features

    The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
    It is also designed to Operate under Harsh Environment
    The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
    It is Compatible with Both Linear and Non-Linear Load
    Furthermore, Low DC Voltage Supports Home and Office Appliances on the inverter
    With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
    High Efficiency Inverter Design and “Power Saving Mode” to Conserve Energy
    Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
    13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
    8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
    4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
    8 ms Typical Transfer Time Between Utility and Inverter Battery, Guarantees Power Continuity
    15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
    Battery DOD(Depth of Discharge)setting from 50% to 100%

  • 3.5kVA – 24V Inverter – Studer Xtender XTM 3500

    Description
    PRAG offers you Studer Xtender XTM 3500 with its seemingly limitless programmable functions, the XTM offers unequaled flexibility compared to other products on the market.
    This Studer Xtender XTM 3500 – 3.5KVA – 24V – inverter/charger has a continuous power rating of 3kVA up to an ambient temperature. In addition to this, it has a 30 minute power rating of 3.5kVA, and can deliver 9kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current.

    The battery charging current can be adjusted between 0 and 90Adc. The factory default settings include a battery charging curve best suited for lead acid batteries with gelled electrolyte (GEL). This battery charging curve can be easily adapted to other types of batteries including OPzS, NiFe, Lithium and Redox Flow, to name but a few.

    The transfer system is active when an AC power source (generator, public grid, shore power…) is available at the AC input of the Xtender. The transition between inverter and transfer mode is achieved without any power cut and allows up to 50Aac of current to pass through to the loads. Similarly, the transition between transfer and inverter mode is extremely fast (max 15ms), which makes the Xtender suitable for many UPS (uninterruptable power supply) applications.

    The Smart-Boost function allows the Xtender to assist the AC source via the inverter function. This way, the currents from both sources (AC-in and inverter) are combined to deliver the energy required by big loads if the loads are more than the AC source can supply.

    The injection function allows the Xtender to send energy to the grid. This function is especially useful in energy storage systems where either the excess energy is injected to the grid, or a specific current is injected at a specific time of the day.

    The Xtender has two auxiliary contacts, configured by default for the automatic start of a generator and the alarm function.

    Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter xts-xtm-xth-en_page_09-4
    Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter Design

    The RCM-10 accessory offers a remote entry to control the inverter externally.

    In addition, the Xtender can be equipped with a remote entry, which can be used to change functions or control the system externally.

    Monitoring and control on site or remotely is possible with the RCC-02/03 remote control or with the LAN, GSM or SMS interfaces. Detailed information on all Xtender accessories can be found on the corresponding section of the website.

    The Xtender communication bus is shared with the MPPT solar charge controllers of the VarioTrack and VarioString series. Inverters and charge controllers are synchronized to ensure an optimum charge of the battery and use of available energy.

    Studer Xtender XTM 3500 – 3.5KVA – 24V – PRAG Inverter Features
    True sine wave voltage
    Reliable and silent with any kind of load
    Outstanding overload capabilities
    Smart-Boost function for assistance to the source even with difficult loads
    Automatic reduction of peak loads (power shaving)
    Multi-stage programmable battery charger with PFC (Power Factor Correction)
    Stand-by level adjustable over a large range and from a very low threshold
    Ultra-fast transfer relay
    Control by digital signal processors (DSP)
    High efficiency
    Easy to Install, Operate resolve Solve

  • 3.5KVA/48V Solar Inverter

    Description
    Featured:
    DSP based pure sine wave inverter system
    Auto Sense Intelligent Control Smart Charger
    Mains Mode Short Circuit Protection
    Fast Changeover ensuring Compatibility with Computers
    TDR (Time Delay Relay), especially for AC compressor based applications
    Compatible with Generator Sets
    Application:

    Home Appliances
    Reliable power Back-up Source for Emergency / Critical Electrical Loads in sudden power outages.
    Computers & Peripherals Office Equipment
    Petrol / Diesel Dispensing Machines, Air Conditioner
    Many More application which require reliable back-up power
    Major Users:

    Residential Apartments, Shopping Malls, Banks, Corporate Offices, Hospitals, Petrol Pumps, Academic Institutes, Clinical Laboratories, Hotels, etc

  • 2.5kVA – 24V Cyber Power Inverter

    Description
    2.5kVA – 24V Cyber Power Inverter:- Non-stop power backup with guaranteed quality power output to support a wide range of applications

    Ideal for security/emergency system, the Emergency Power Systems Series with Automatic Voltage Regulation (AVR) provides AC power output to guarantee stable power supply. When connected to additional external batteries and generators, the products provide backup power output during power failures by automatically switching from utility to external batteries, ensuring seamless operation of devices.

    The systems also feature multifunction LCD readout to display precise information of power and battery conditions for convenient management.

    Pure Sine Wave Output
    The product provides pure sine wave output, which is suitable for equipment requiring active PFC power supply, motor-based devices and sensitive electronics. It guarantees electronic equipment to run more efficiently.

  • 5KVA – 48V Smart Hybrid Inverter

    PRAG 5KVA – 48V Smart (Pure Sine Wave) Hybrid Inverter/Charger is a combination of an inverter, battery charger and AC auto transfer switch into one complete system with high conversion efficiency.

    So, it is packed with unique features and it is one of the most advanced inverter and chargers in the market today.

    Furthermore, the PRAG Inverter features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

    Subsequently, the (Pure Sine Wave) Inverter and Charger is equipped with a powerful charger of up to 110Amps (depending on model). However, the overload capacity is super to the best of the continuous output for limited period of seconds to reliably support tools and equipment longer.

    Trust the product will deliver the best result for you.

    PRAG 5KVA – 48V Smart Hybrid Inverter Features
    Pure Sine Wave Output
    Narrow/Wide Input Range Selection
    Charging Current Selectable
    Built-In AC Charger
    Generator Compatible
    Cold Start Function
    RS232 Multiple Communications and
    Optional USB Port

    238,900.00283,100.00

    5KVA – 48V Smart Hybrid Inverter

    238,900.00283,100.00
  • 2KVA – 24V Talent Inverter

    Description
    PRAG 2KVA – 24V Talent Inverter (Pure Sine Wave) Inverter/Charger is a combination of an inverter, battery charger and AC auto transfer switch into one complete system with high conversion efficiency.

    So, it is packed with unique features and it is one of the most advanced inverter and chargers in the market today.

    Furthermore, the PRAG Inverter features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

    Subsequently, the (Pure Sine Wave) Inverter and Charger is equipped with a powerful charger of up to 110Amps (depending on model). However, the overload capacity is super to the best of the continuous output for limited period of seconds to reliably support tools and equipment longer.

    Trust the product will deliver the best result for you.

    PRAG 2KVA – 24V Talent Inverter Features
    Pure Sine Wave Output
    Narrow/Wide Input Range Selection
    Charging Current Selectable
    Built-In AC Charger
    Generator Compatible
    Cold Start Function
    USB/RS232 Multiple Communications

    103,700.00113,700.00

    2KVA – 24V Talent Inverter

    103,700.00113,700.00
  • 1.5KVA 24V Solar Inverter

    Overview
    High reliable system
    Advanced digital automatic control technology to ensure the power durable and reliable

    Strong Environment Adaptability

    Wide input voltage and frequency range to avoid frequent switching.
    Intelligent charging mode.
    Shutdown charging function.
    Three steps charging mode
    Full Display Information

    LCD Display: Input voltage, Input frequency, Output voltage, Output frequency, Battery voltage, PV input voltage, Solar charger, Full load, Temperature, Failure.

    LCD Display Mode
    Full Display Function

    Inverter short circuit and overload protection function.
    Battery over discharge protection.
    Solar cell module polarity reverse connection protection.
    Solar charge controller, inverter and other internal short circuit protection.
    Features:

    Wide input voltage range
    Fully digitized microprocessor control
    UPS mode and inverter mode suit for different application
    LCD displays comprehensive parameters (Optional)
    Cold start
    Short circuit and overload protection
    Intelligent battery management
    Changing current is optional
    Compatible with generator

    88,000.00115,300.00

    1.5KVA 24V Solar Inverter

    88,000.00115,300.00
  • 6KVA 48V Inverter-PRO

    • Fast Charging
    • Inverter with Voltage & Temperature Sensors + CCT Monitor

    6KVA 48V Inverter-PRO

    900,000.00
  • 6KVA 48V Inverter-PRO

    • Fast Charging
    • Inverter with Voltage & Temperature Sensors + CCT Monitor

    6KVA 48V Inverter-PRO

    900,000.00
  • 6.0kVA – 48V Inverter – Studer Xtender XTH 6000

    PRAG offers you 6.0kVA – 48V Inverter – Studer Xtender XTH 6000 -48 with its seemingly limitless programmable functions, the XTH offers unequaled flexibility compared to other products on the market.

    Continuous power rating of 5kVA up to an ambient temperature of 40°C, 30 minute power rating of 6kVA, 15kVA for up to 5 seconds!

  • 6.5KVA – 48V Inverter – H

    Description
    PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.

    So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today.

    Furthermore, the PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

    Subsequently, PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

    PRAG 6.5KVA – 48V Inverter Features

    The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
    It is also designed to Operate under Harsh Environment
    The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
    It is Compatible with Both Linear and Non-Linear Load
    Furthermore, Low DC Voltage Supports Home and Office Appliances on the inverter
    With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
    High Efficiency Inverter Design and “Power Saving Mode” to Conserve Energy
    Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
    13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
    8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Inverter Batteries
    4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
    8 ms Typical Transfer Time Between Utility and Inverter Battery, Guarantees Power Continuity
    15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
    Battery DOD(Depth of Discharge)setting from 50% to 100%

  • 3.5kVA – 24V Inverter – Studer Xtender XTM 3500

    Description
    PRAG offers you Studer Xtender XTM 3500 with its seemingly limitless programmable functions, the XTM offers unequaled flexibility compared to other products on the market.
    This Studer Xtender XTM 3500 – 3.5KVA – 24V – inverter/charger has a continuous power rating of 3kVA up to an ambient temperature. In addition to this, it has a 30 minute power rating of 3.5kVA, and can deliver 9kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current.

    The battery charging current can be adjusted between 0 and 90Adc. The factory default settings include a battery charging curve best suited for lead acid batteries with gelled electrolyte (GEL). This battery charging curve can be easily adapted to other types of batteries including OPzS, NiFe, Lithium and Redox Flow, to name but a few.

    The transfer system is active when an AC power source (generator, public grid, shore power…) is available at the AC input of the Xtender. The transition between inverter and transfer mode is achieved without any power cut and allows up to 50Aac of current to pass through to the loads. Similarly, the transition between transfer and inverter mode is extremely fast (max 15ms), which makes the Xtender suitable for many UPS (uninterruptable power supply) applications.

    The Smart-Boost function allows the Xtender to assist the AC source via the inverter function. This way, the currents from both sources (AC-in and inverter) are combined to deliver the energy required by big loads if the loads are more than the AC source can supply.

    The injection function allows the Xtender to send energy to the grid. This function is especially useful in energy storage systems where either the excess energy is injected to the grid, or a specific current is injected at a specific time of the day.

    The Xtender has two auxiliary contacts, configured by default for the automatic start of a generator and the alarm function.

    Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter xts-xtm-xth-en_page_09-4
    Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter Design

    The RCM-10 accessory offers a remote entry to control the inverter externally.

    In addition, the Xtender can be equipped with a remote entry, which can be used to change functions or control the system externally.

    Monitoring and control on site or remotely is possible with the RCC-02/03 remote control or with the LAN, GSM or SMS interfaces. Detailed information on all Xtender accessories can be found on the corresponding section of the website.

    The Xtender communication bus is shared with the MPPT solar charge controllers of the VarioTrack and VarioString series. Inverters and charge controllers are synchronized to ensure an optimum charge of the battery and use of available energy.

    Studer Xtender XTM 3500 – 3.5KVA – 24V – PRAG Inverter Features
    True sine wave voltage
    Reliable and silent with any kind of load
    Outstanding overload capabilities
    Smart-Boost function for assistance to the source even with difficult loads
    Automatic reduction of peak loads (power shaving)
    Multi-stage programmable battery charger with PFC (Power Factor Correction)
    Stand-by level adjustable over a large range and from a very low threshold
    Ultra-fast transfer relay
    Control by digital signal processors (DSP)
    High efficiency
    Easy to Install, Operate resolve Solve

  • 3.5KVA/48V Solar Inverter

    Description
    Featured:
    DSP based pure sine wave inverter system
    Auto Sense Intelligent Control Smart Charger
    Mains Mode Short Circuit Protection
    Fast Changeover ensuring Compatibility with Computers
    TDR (Time Delay Relay), especially for AC compressor based applications
    Compatible with Generator Sets
    Application:

    Home Appliances
    Reliable power Back-up Source for Emergency / Critical Electrical Loads in sudden power outages.
    Computers & Peripherals Office Equipment
    Petrol / Diesel Dispensing Machines, Air Conditioner
    Many More application which require reliable back-up power
    Major Users:

    Residential Apartments, Shopping Malls, Banks, Corporate Offices, Hospitals, Petrol Pumps, Academic Institutes, Clinical Laboratories, Hotels, etc

  • 2.5kVA – 24V Cyber Power Inverter

    Description
    2.5kVA – 24V Cyber Power Inverter:- Non-stop power backup with guaranteed quality power output to support a wide range of applications

    Ideal for security/emergency system, the Emergency Power Systems Series with Automatic Voltage Regulation (AVR) provides AC power output to guarantee stable power supply. When connected to additional external batteries and generators, the products provide backup power output during power failures by automatically switching from utility to external batteries, ensuring seamless operation of devices.

    The systems also feature multifunction LCD readout to display precise information of power and battery conditions for convenient management.

    Pure Sine Wave Output
    The product provides pure sine wave output, which is suitable for equipment requiring active PFC power supply, motor-based devices and sensitive electronics. It guarantees electronic equipment to run more efficiently.

  • 5KVA – 48V Smart Hybrid Inverter

    PRAG 5KVA – 48V Smart (Pure Sine Wave) Hybrid Inverter/Charger is a combination of an inverter, battery charger and AC auto transfer switch into one complete system with high conversion efficiency.

    So, it is packed with unique features and it is one of the most advanced inverter and chargers in the market today.

    Furthermore, the PRAG Inverter features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

    Subsequently, the (Pure Sine Wave) Inverter and Charger is equipped with a powerful charger of up to 110Amps (depending on model). However, the overload capacity is super to the best of the continuous output for limited period of seconds to reliably support tools and equipment longer.

    Trust the product will deliver the best result for you.

    PRAG 5KVA – 48V Smart Hybrid Inverter Features
    Pure Sine Wave Output
    Narrow/Wide Input Range Selection
    Charging Current Selectable
    Built-In AC Charger
    Generator Compatible
    Cold Start Function
    RS232 Multiple Communications and
    Optional USB Port

    238,900.00283,100.00

    5KVA – 48V Smart Hybrid Inverter

    238,900.00283,100.00
  • 2KVA – 24V Talent Inverter

    Description
    PRAG 2KVA – 24V Talent Inverter (Pure Sine Wave) Inverter/Charger is a combination of an inverter, battery charger and AC auto transfer switch into one complete system with high conversion efficiency.

    So, it is packed with unique features and it is one of the most advanced inverter and chargers in the market today.

    Furthermore, the PRAG Inverter features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

    Subsequently, the (Pure Sine Wave) Inverter and Charger is equipped with a powerful charger of up to 110Amps (depending on model). However, the overload capacity is super to the best of the continuous output for limited period of seconds to reliably support tools and equipment longer.

    Trust the product will deliver the best result for you.

    PRAG 2KVA – 24V Talent Inverter Features
    Pure Sine Wave Output
    Narrow/Wide Input Range Selection
    Charging Current Selectable
    Built-In AC Charger
    Generator Compatible
    Cold Start Function
    USB/RS232 Multiple Communications

    103,700.00113,700.00

    2KVA – 24V Talent Inverter

    103,700.00113,700.00
  • 1.5KVA 24V Solar Inverter

    Overview
    High reliable system
    Advanced digital automatic control technology to ensure the power durable and reliable

    Strong Environment Adaptability

    Wide input voltage and frequency range to avoid frequent switching.
    Intelligent charging mode.
    Shutdown charging function.
    Three steps charging mode
    Full Display Information

    LCD Display: Input voltage, Input frequency, Output voltage, Output frequency, Battery voltage, PV input voltage, Solar charger, Full load, Temperature, Failure.

    LCD Display Mode
    Full Display Function

    Inverter short circuit and overload protection function.
    Battery over discharge protection.
    Solar cell module polarity reverse connection protection.
    Solar charge controller, inverter and other internal short circuit protection.
    Features:

    Wide input voltage range
    Fully digitized microprocessor control
    UPS mode and inverter mode suit for different application
    LCD displays comprehensive parameters (Optional)
    Cold start
    Short circuit and overload protection
    Intelligent battery management
    Changing current is optional
    Compatible with generator

    88,000.00115,300.00

    1.5KVA 24V Solar Inverter

    88,000.00115,300.00

Main Menu